Dear,
Mobile phone mall
塞尔科技深圳有限公司
Scan QR code Visit the mobile mall
Shopping
You don't have any products yet, so please buy them!
    Total: Checkout Now()
    All Categories
    定制您的专属电子烟品

    Member price
    Price

    Number: - + piece(Stockpiece)
    • 发布时间: 2018 - 06 - 11
      价格:
      0
      市场价:
      19900
      ¥
      0
      Reflow soldering is achieved by re-melting paste solder pre-dispensed on printed circuit board pads to achieve soldering of the solder joints of the surface-mount component or the mechanical and electrical connection between the leads and the printed circuit board pad. .
    • Product introduction
    • Product parameters
    • Scope of application
    • Commodity Reviews
    • • Windows window operation interface, two control methods, computer control and emergency manual control, with security protection function;

      • The leading heating method solves the dead angle problem during reflow soldering. It is suitable for the welding of electrical components such as CSP, BGA, and 0201CHIP.

      • Professional wind wheel design, stable wind speed, effectively prevent wind uniformity when the PCB board is heated, and achieve the highest repeat heating:

      • Each temperature zone adopts a forced independent cycle, independent PID control, and independent heating up and down, so that the cavity temperature is accurate, uniform, and heat capacity is large;

      • The insulation layer is made of high-quality aluminum silicate insulation material, which has good heat preservation effect and rapid temperature rise, and it is from room temperature to working temperature ≤ 10min;

      • Lead-free environment-friendly design for the furnace, all made of high-quality imported stainless steel plates;

      • High-quality, high-temperature, high-speed motor delivers smooth wind, low vibration, and low noise;

      • The furnace body adopts cylinder jacking and safety rod support, which is safe and convenient.

      • PCB board transmission adopts stepless variable speed transmission, network chain synchronization, and excellent stability;

      • Special high-quality aluminum alloy rails, automatic refueling system to ensure accurate and long guide rail width adjustment;

      • On-line UPS equipped with power-off protection function to ensure normal output of PCB board after power-off, without damage;

      • Powerful software function, online temperature measurement of PCB board, and analysis, storage and printing of data curve at any time;

      • The PC/PLC communication adopts the PC/PP protocol, which ensures stable operation and eliminates crashes.

      • Automatic monitoring, showing the working status of the equipment, which is conducive to monitor the equipment at any time;

      • Independently controlled cooling system, made of stainless steel, cooling convection up and down, cooling curve and welding temperature curve mirror image, in full compliance with SMT international certification standards;

    • 项  目 

      规   格   型   号 

      控制系统

      电脑+PLC

      加热/冷却区

      上十二下十二共24个加热区 2个冷却区

      加热区长度

      3550mm

      温控范围

      室温-350℃

      温控精度

      ±1 -2℃

      三点温差

      ±2℃

      冷却方式

      强制风冷(轴流风冷系统)

      PCB尺寸

      (W)50-(W)400mm

      PCB传输高度

      900±20mm

      传送方式

      链轨+网带传送

      传送方向

      左→右

      传送速度

      0-2000mm/min  变频可调

      链轨调宽范围

      50-500mm

      传输网带宽度

      460mm

      断电保护

      UPS电源

      电源

      A3ø380V 50HZ

      正常运行功率/总功率

      8/93KW

      机身尺寸(L*W*H)

      6880mm(L)*1500mm(W)*1550mm(H)

      净重

      2800KG

    • 产品名称:

      12 temperature zone reflow oven (large reflow machine)

      上市日期: 2018-06-11
    回到顶部
    Authentic guarantee The three certificates are complete and provide formal invoices.
    More affordable More favorable than offline channels
    7 days no reason to return Provide you with worry-free after-sales protection
    . Customer service 7*24 hours for you