Soldering temperature

Q1. What is the recommended soldering temperature for lead-free process?

Q2. Why is the use of JBC welding tool can be used at a relatively low tip temperature?

Q3. which are the advantages of soldering under low temperature?

Q4. What is the recommended sleep temperature?

Q5. How do I calibrate my soldering station host?

Q1. What is the recommended soldering temperature for lead-free process?

Our experience shows that 90% solder joints JBC can be successfully welded at 350°c (660℉) or below.

In any case, we do not recommend exceeding 370°c (700℉).

Q2. Why use the JBC welding tool to use the lower tip temperature when soldering? This is because there is a very fast heat response in the JBC. Traditional iron tip in welding, thermal energy will be transferred to the circuit board, a strong temperature drop, if the heat response is slow, the iron will not have enough time to restore temperature, especially in a series of continuous solder joints welding.

This is why operators use the traditional iron tip will choose a higher temperature reasons, which can easily lead to the life of the iron tip shortened, PCB and component damage.

Q3. which are the advantages of soldering under low temperature?

1. It can reduce the oxidation of the iron tip, the iron can be used for a longer time. This improves the infiltration of the iron tip and therefore improves the heat conduction efficiency.

2. Flux does not evaporate directly on the tip of the iron, but is effective when welded. In this way, the iron tip does not darken quickly, and is more invasive.

3. Excessive thermal energy transfer can damage components and circuit boards, low-temperature welding minimizes risk.

4. The quality of the process is improved due to reduced rework and scrap problems.

Q4. What is the recommended sleep temperature?

The factory set value of 220 ℃ is suitable for most cases.

At this temperature, the oxidation situation will be minimized, when the welding fixture is picked up to the welding seat can also be quickly elevated to the set temperature, about a second to complete the temperature rise.

Q5. How do I calibrate my soldering station host?

Since the heating technique is based on a micro-processing drive in the Advanced series soldering station, no calibration is required.